dây gia nhiệt Thermon, HTsx 20-2, Ksx 15-2, Bsx 10-2 , Self Regulating Heating Cable, Electric heat tracing
dầy gia nhiệt thermon Dây Gia Nhiệt Self Regulating HTSX-20-2-OJ Electrical Heat Tracing , Heat trace, Dây Gia Nhiệt Thermon HTSX 20-2day gia nhiệt thermon bsx

1. Dây Gia Nhiệt Thermon, Duy Trì Nhiệt Độ Chống Đông Đặc

Dây Gia Nhiệt Thermon, Duy Trì Nhiệt Độ Chống Đông Đặc Dây gia nhiệt Thermon là một trong những thương hiệu nổi tiếng thế giới về các sản phẩm gia nhiệt công nghiệp. Với lịch sử lâu đời và kinh nghiệm dày dặn, Thermon đã và đang cung cấp những giải pháp tối ưu cho …

day gia nhiẹt thermon Dây Gia Nhiệt BSX 10-2Dây Gia Nhiệt Self Regulating HTSX-20-2-OJ Electrical Heat Tracing , Heat trace,

Dây gia nhiệt Chống Ngưng tụ, đống băng, bù nhiệt

Dây gia nhiệt là gì? Quá trình làm nóng dầu, đường ống, bể chứa, v.v. có thể bị cản trở bởi các kỹ thuật làm nóng không hiệu quả, dẫn đến chi phí bảo trì cao hơn cũng như mất nhiều thời gian hơn cho toàn bộ quá trình đối với các ngành công nghiệp …

Heating cables

Heating cables High temperature self-regulating heating cables are used for maintaining the temperature of pipes, tanks and other hydraulic units located in areas classified as areas at risk of explosion (explosive atmosphere – ATEX). They can be cut to size on site and are therefore implemented very easily. They resist rinse sterilization steam. Power connection …

ATEX-EX Electric Duct Heaters

ATEX-EX Electric Duct Heaters FATI Ex electric batteries are designed for use in Places with Explosion Hazard, Zones 1 & 2, groups IIA and IIB, temperature classes T1-T6. ATEX II 2G Ex d IIB T1-T6 certification, according to EN 60079-0 / 60079-1, and IECEx Ex d IIB T1-T6, according to IEC 60079-0 / 60079-1. Typical …

Electric Duct Heaters

Electric Duct Heaters The electric heaters, with protection degree IP40, IP55, IP65, IP66, are suitable for use in a considerable number of industrial applications and processes, to heat air or gas flows inert, in a safe area. These products are designed by our technical department in accordance with the customer’s request or technical specifications. The …

ATEX-EX Threaded Heaters

ATEX-EX Threaded Heaters Threaded immersion heaters for Explosion Hazardous Locations, Zone 1 & amp; 2, groups IIA, IIB, and IIC, T1-T6 temperature classes. ATEX II 2G Ex d IIC T1-T6 certification, according to EN 60079-0 / 60079-1, and IECEx Ex d IIC T1-T6, according to IEC 60079-0 / 60079-1. The threaded immersion heaters are composed …

Threaded Heaters

Threaded Heaters Our threaded immersion heaters are composed of tubular elements welded to a screw cap, which can be screwed to a threaded inlet placed in the tank wall. The electric heating elements are built with selected Ni Cr 80/20 wire, placed in the center of a metal tube, and insulated with high quality magnesium …

ATEX-EX Flanged Heaters

ATEX-EX Flanged Heaters The F.A.T.I. of flanged heaters is suitable for all process fluids, non-corrosive to construction materials, intended for installation in Areas with Explosion Hazard (Zone 1 & 2). ATEX-IECEx certification. Typical applications: • Fresh water • Sea water • Crude oil • Process gas • Air • Tank heating • Synthetic oils • …